weiter

MιA®

Modular intelligent active Filters

We develop and manufcture our modular inelligent active Filters in Germany.

The Product family MιA® from Condensator Dominit GmbH is the newest generation of current controlled active filters which maximize values and
 minimize losses.

Frequency converters and other energy efficient solutions play a substantial role in our energy transition policy. Unfortunately, because this kind of equipment has a non-linear U-I-characteristic, it causes critical system perturbations by harmonics. Active filters provide reduction of harmonic currents, reactive power, flicker minimization and grid balancing.

These provisions are necessary in grids, where the perturbations lead to non-compliance with relevant standards. EN 50160 describes the perturbation types for public low- and medium voltage distribution networks. These compatability level guidelines state the minimum requirements for a long-term fault-free operation of consumers in the grid. EN 61000-2-4 describes simultaneously the compatibility levels in the industrial grid. EMC Class 2 of this standard is compliant with EN 50160. Devices for public grids may therefore operate in class 2 industrial grids.

If compliance levels given in standards are exceeded, malfunctions of production relevant machines and control systems can occur. Suppliers of these devices are then free to withhold the warranty and they are not liable for damage claims. MιA® provides the necessary conformity with standards in your distribution system and therefore guards against disturbances, failures and loss of warranty and rights of compensation.

Protect your grid with MιA®!

Nominal grid voltage200 V - 415 V, ± 10 %
Rated frequency50 Hz / 60 Hz ± 3 Hz
Connection3-Phase alternating current with N + PE
Grid configurationTN, TT
Comensation modesharmonic current compensation up to 53rd order (individually programmable, dynamic), reactive power compensation (ind. / cap. – each dynamic or static) flicker-reduction, load balancing
Parametrisationwith 7 inches colour-touchscreen, integrated webserver, optional with MιA® configuration- and maintenance-software for PC
InterfacesEthernet, USB, Modbus TCP
Digital inputs3 (parametrized)
Relay outputs2 (alarm, filter ON)
Inverter3-level IGBT with DC voltage link and reduced losses
Reaction time21 µs
ActivationControl computer with 3 signal processors
Losses< 2,1 % of rated power (full power, harmonic compensation)
< 1,1 % of rated power (full power, reactive power compensation)
< 0,1 % of rated power in standby
Enviromental conditions-10 °C … + 55 °C,  derating above 40 °C with 2 % / K,  95 % rel. humidity, not condensing, Installation heigth up to 2000 m above sea-level without derating
Overload capability10 ms with 180 % of the rated current
Data logging3-phase measurement with on-site current transformers, Closed Loop or Open Loop
Current transformers (on site)xx / 1 A, 5 VA, class 1 or better
PaintingCover RAL5040, wall bracket RAL7035, robust powder coating
Degree of protectionIP 20 for indoor use
ExecutionWall mounting, infeed from bottom
CoolingForced air cooling (fans)
Integrated powermodules12
Rated current per phase60 A120 A
Rated neutral current180 A  360 A
Rated current at 400 V41,5 kVA83,0 kVA
Dimensions (WxDxH)504 x 291 x 980 mm504 x 515 x 980 mm
Weight96 kg160 kg
Recommended on-site
pre-fuses gG/Gl or CB80 A160 A
ArticlecodeNQ2505NQ2506