The MIКA RCOMP series is the system of choice when large controlled power is needed.
The rack design makes the RCOMP concept compact and easy to transport. All components (except the reactor) are preassembled in the factory and only require correct positioning on site.
Particularly in high-power systems substantially higher power per step is available than, for example, from an enclosed system. The system is installed in a separate locked electrical equipment room.
A separate cabinet (e.g. C-65-A) contains all required monitoring and control units; the control cabinet can optionally be connected to an available process control system/centralized instrumentation and control system.
FEATURES
| Operating voltage | 1 kV - 24 kV* |
| Nominal frequency | 50 / 60 Hz |
| Insulation level | 20 / 60 kV bis 50 / 150 kV |
| Nominal power | 150 kvar - 20 000 kvar* |
| Type series | B-/C-/E-Serie |
| Design versions | -F (fixed step) |
| -E (with contactor for external actuation) | |
| -A (system with automatic control) | |
| Tuned frequency | 189 Hz (7 %)* |
| 141 Hz (12,5 %) | |
| * LINR inrush current limiting reactors or filter application | |
| Protection | IP00 |
| Ambient temperature | –15 °C to 40 °C* |
| Installation site | Indoor |
| Altitude | < 1000 m above sea level |
| Impregnating material | Faradol / Jarylec |
| Norm | IEC 60871-1 / IEC 60071 / IEC 60282-1 / VDE 101 |
| Optional | Phase current transformer |
| Vacuum contactor or power circuit breaker | |
| Discharge voltage transformer | |
| Voltage transformer, definite-time overcurrent- time protection, etc. | |
| Control cabinet | |
| Circuit breaker, grounding switch | |
| Oil pan | |
| Surge arrester | |
| * Other versions available on request |
Manuel Schörmann
Condensator Dominit GmbH
An der Bremecke 8
59929 Brilon
Tel: 02961 782 58
E-Mail: manuel.schoermann(at)dominit.eu
