weiter

MIKA-RCOMP

The MIКA RCOMP series is the system of choice when large controlled power is needed.

The rack design makes the RCOMP concept compact and easy to transport. All components (except the reactor) are preassembled in the factory and only require correct positioning on site.

Particularly in high-power systems substantially higher power per step is available than, for example, from an enclosed system. The system is installed in a separate locked electrical equipment room.

A separate cabinet (e.g. C-65-A) contains all required monitoring and control units; the control cabinet can optionally be connected to an available process control system/centralized instrumentation and control system.

FEATURES

  • Compact design
  • High power per step
  • Fuse monitoring
  • Polygap® reactors
  • Low-loss all-film technology
  • Robust hot-dip galvanized steel rack
  • Flexible extension
  • Optional system visualization and linkup with PLC
  • Touch panel in control cabinet

Technical Specifications

Operating voltage 1 kV - 24 kV*
Nominal frequency 50 / 60 Hz
Insulation level 20 / 60 kV bis 50 / 150 kV
Nominal power 150 kvar - 20 000 kvar*
Type series B-/C-/E-Serie
Design versions-F (fixed step)
 -E (with contactor for external actuation)
 -A (system with automatic control)
Tuned frequency189 Hz (7 %)*
 141 Hz (12,5 %)
 * LINR inrush current limiting reactors or filter application
  
Protection IP00
Ambient temperature –15 °C to 40 °C*
Installation site Indoor
Altitude < 1000 m above sea level
Impregnating material Faradol / Jarylec
Norm IEC 60871-1 / IEC 60071 / IEC 60282-1 / VDE 101
Optional Phase current transformer
 Vacuum contactor or power circuit breaker
 Discharge voltage transformer
 Voltage transformer, definite-time overcurrent- time protection, etc.
 Control cabinet
 Circuit breaker, grounding switch
 Oil pan
 Surge arrester
  
* Other versions available on request  

(Kopie 1)

If you have questions about our MIKA product family, please contact Mr. Manuel Schörmann:

open contact partner

Manuel Schörmann
Condensator Dominit GmbH
An der Bremecke 8
59929 Brilon
Tel: 02961 782 58
E-Mail: manuel.schoermann(at)dominit.eu